The resetter suitable for 88 printhead
Instruction
When you need reset the 88 printhead, please use the pritherhead resetter as following instructions:
1. Before reset the printerhead, please note:
(1) When the light of the “printhead healthy” program shows “yellow”, it indicates the printhead need resetting now;
(2) If the light shows “green”,it indicate the printerhead is OK,don’t need resetting;
(3) But if the light shows”red”,there're two possibilities:
a) The printerhead has been damaged, it's useless to reset.
b) The data of the print head has been used up or messed up. It need resetting urgently.
2.If the light shows ”yellow”, then turn off the printer, take the print head out of the printer
3.Now Connect the four pins of the resetter to the four pins on print head.
4.Then press the “R” button,it can be reset by our print head resetter.
Please Note: When you hear ”bi” ,it indicates ok;but when you hear ”bi,bi,bi..”,it indicates wrong. Then press the “R” button reset again.
5.It is easy to check.
After resetting, press the “v”button to check whether the resetter has been reset successfully or not.
6.Finally, you will find the” printhead healthy”program lights is “green”.It means the print head has been successfully reset by the resetter.