New !
THE QE-888 CHIP RESETTER is used to reset the chip on an Epson ink Cartridge. In order to reuse an Epson ink cartridge, it needs to be both “reset” and ”refilled”.
It is suitable for below printer and cartridge models:
name |
model |
compatible printer models |
compatible cartridge numbers |
chip resetter for epson |
QE-888 |
Epson Expression Home XP-200
Epson Expression Home XP- 300
Epson Expression Home XP-600
Epson Expression Home XP-800
Epson Expression Home XP-750
Epson Expression Home XP-850
Epson Expression Home XP -30
Epson Expression Home XP-102
Epson Expression HomeXP- 202
Epson Expression HomeXP- 205
Epson Expression HomeXP- 302
Epson Expression HomeXP- 305
Epson Expression HomeXP- 402
Epson Expression HomeXP- 405
Epson Expression Home XP-201/XP101
|
T2001-T2004
T2001(XL)-T2004(XL)
T2731-T2734
T2771-T2776
T1801-T1804
T1811 (XL)-T1814 (XL)
T2611-T2614
T2631-T2634
T2421-T2426
T2431-T2436
T1761-T1764
|
How to use the uni-kit resetter
The pins on the resetter should tightly contact the terminals on the chip of the Cartridge, be sure to press against the pins firmly. After a few seconds, the LED Indicator will light up and flash about 2~4 times in red, if the LED turns green, it means the resetting operation has been successfully completed. If the LED turns red, it could mean that the chip on the cartridge is abnormal and not resettable.
Once the cartridge has been reset, refill it and install it into the printer.
reset instruction:
1.The pins on the resetter should tightly contact the terminals on the chip of the
cartridge, be sure to press against the pins firmly.
2.After a few seconds, the LED indicator will light up and flash about 2~4 times in red,
if the LED turns green, it means the resetting operation has been successfully completed.
3. If the LED turns red, the reset fails. please reset it again. If the problem still exists, the
chip on the cartridge may be abnormal and not resettable
notice:
1. This QE-888chip resetter will work on 9 chip cartridges, as Shown on the diagram. The 4 top pins of the resetter must make contact with the 4 top terminals on the chip; the 3 bottom pins of the resetter must make contact with the 3 center terminals on the chip(you do not need to reset the terminals on the chip that are to the far right or far left).
2. make sure there is enough ink in the cartridge before reset (see picture below)
3. Plsase be sure to refill the cartridge before reinstalling it into the printer.