| specifications︰ | [Instruction]
Please first connect power,after the below indicator light(Red light) light,insert the memory card later insert chip then can rewriter chip,validate chip,read data into chip.
I. Please according to the following instruction step as your personal requirement function:
1 Validate Chip: Validate whether the model of chip is right.
1.1 Insert memory card which model need to validate.
1.2 Insert chip which need to check.
1.3 Press the blue pushbutton,at this time,the green light LED will flash.
1.4 After finish,the green light LED will light and it means validate successful,if green light LED doesn’t light it means this chip doesn’t match memory model.
2 Rewriter data and validate:write the empty chip into memory card.
2.1 Insert the memory card which model need to rewrite
2.2 Insert chip
2.3 Press blue pushbutton two times,the green light LED will flash.
2.4 After finish,the green light LED will light which means rewrite information successful and validate is right,if the green light LED doesn’t light,it means chip rewrite failure.
3 Reading chip data into memory card: read the original or full chip data and deposite in memory card.
3.1 Insert memory card which need to deposite new data.
3.2 Insert chip which need to read data.
3.3 Press blue pushbutton five seconds then unclinch,the green light LED will flash.
3.4 After finish,the green light LED will flash which means rewrite information successful and validate is right,if the green light LED doesn’t flash,it means chip rewrite failure. |
| Advantages︰ | If customers need to buy manifdder or laser printer, the cost of originial Toner cartridge is too expensive, In order to decrease the cost,when customers use out the originial Toner cartridge, the date of chip of Toner cartridge is down to zero. Customers can use this chip rewriter for shape printer to rewrite data so can let the data full.
The method as following:
1.Put the orignial Toner cartridge chip which don't use before in this mechine.Read data and deposit data to u disk(outfit is following machine).
2.Put used out originial toner cartridge chip in this rewriter and read the full data from u disk and put in the old chip. The data of chip can change zero to full.
3.Customers put toner which you test is adaptive and the quanlity is good to the Toner catridge.
4.install Toner cartridge with be rewrieted chip data then can use as originial chip.When use out and do it again.
5.Compatible all Toner cartridge shape of manifdder or laser printer,
6.When refill,please notice don't make dust and toner on the connecting point of chip,avoid effecting the function. |
|
|
| Suitable Printers List |
|
| Model |
|
Model |
Model |
|
| Sharp AR-M450/AR-M350 |
Sharp AR-255 |
Tiger-450m |
|
| Sharp AR-451/AR-351 |
Sharp AR-270 |
Xerox DC-400 |
|
| Sharp AR-275/AR-235/AR-185 |
Sharp AR-276 |
Xerox DC-400 |
|
| Sharp AR-5316/AR-5320 |
Sharp AR-455 |
Xerox DC-400 |
|
| Sharp AR-152 |
Sharp AR-550 |
IBM Infoprint 1226 |
|
| Sharp AR-160 |
Sharp AR-M160 |
EPSON EPL-2120 |
|
| Sharp AR-236 |
Sharp AR-M451U |
EPSON ELP-8700/8900 |
|
|
|
|
|
|
