• CHARACTERISTIC

1. There is sopnge inside
2. It can be reused
3. You can refill the ink into it 
4. You can use the original chip(eg,permanent chip) 

•  COLOR

          PGBK/BK/CY/MG/YL／LC/LM 

• SUITABLE PRINTERS

          iP4200, iP5200, iP5200R, iP6600D, MP500, MP800, MP950

• NOTICE FOR CARTRIDGES

          If  you use it for a long time,the computer tells you to replace cartridge doesn't

          work,and the ink light lights press the button''paper''for 5 seconds,maybe need

          redo severals times,then the light is off,all ok.

• INSTALLATION PROCEDURES

a) INSTALL CHIPS

1. Carefully remove the original chips from original cartridges .Pay more attention to the chips when you do this procedure,make sure that the chips are not damaged.
2. Put some glue on the socket of system's cartridge.Then stick original chips into the socket according to the color of cartridges.Please make sure that the chips NO. matches with cartridge NO.  

b) INSTALL CARTRIDGES

          Stick the support arm on the proper position.Then place the CIS cartridges into

          printer.Please press the cartridge and make sure that every cartridge is well

          installed according to the color label.

c) INSTALL TUBING

          Clamp the tube into the support arm .

d) ADJUST TUBING

          Adjust the tube length and move the cartridge carriage from left to right for

          several times.Please make sure there will be no block and collision when the

          cartridges moving from one side to the other.Insure there's plenty length of tube

          to make teh cartridge carriage can thoroughly move to the right side.