Instruction Manual for Refilling Seiko Aluminous Sack:
Firstly,the Seiko empty cartridge needs to install chips.Please install the matching Seiko chips on the empty cartridge.The Seiko chip is sold by different district,because in different district the data of chip is different.Be sure that your chips are matching in your district.It is time to refill ink after installing the chips.The following are two kinds of methods for refilling ink.
Method one:
Approach 1:Inset the connecting tool into the hole of Seiko Aluminous Sack directly.
Approach 2:Connect the vacuum refill tool with the connecting tool, and then refill ink into the Aluminous Sack.
Approach 3:Use the matching silica gel to stopper the ink refill hole of the Aluminous Sack which has been refilled ink.
Approach 4:Install the plastic cap.
Approach 5:The ink refilling is completed.
Method two:
Approach 1:Cut the Seiko Aluminous Sack following the cut line position.
Approach 2:Open up the Aluminous Sack.
Approach 3:Refill ink directly into the Aluminous Sack.
Approach 4:Fold the Aluminous Sack which has been refilled ink along with the line,and use machine to seal it.
Approach 5: It is better to seal the Aluminous Sack with double lines, which can prevent from ink leaking.
|
|
|
|
| specifications︰ | Aluminous Sack For larger format printer specifications following:
1.110 ML
2.220 ML
3.440 ML
4.500 ML
5.1000 ML
Materials:
It is made of four layers,but the different materials in differen layers:
1.The first layer is made of PE
2.The second layer is made of nylon
3.The third layer is made of aluminum film
4.The fourth layer is made of PET
|
|
|
|
