The resetter suitable for Hp 88 printhead
Instrution

When you want to reset the Hp88 printhead,you should use our pritherhead resetter as follow instructions:

1.     Before you use our resetter to reset the printerhead,please note:

(1) when you find the light of the “printhead healthy” program shows “yellow”,it means the printhead should be resetted by our resetter；

(2) if the light shows “green”,it means the printerhead is ok,don’t need reset；

(3) But if the light shows”red”,it means the printerhead has destroy, it cann’t not be resetted.

2.If the light shows”yellow”, then you should turn off the printer power,take ther printhead out of the printer

3.Now you can Contact the four pins of the reseter to the printerhead four pins

4.Then press the “R” button，it can be resetted by our printhead resetter.
   Remark:when you listen”bi” ,it means ok；but when you listen”bi,bi,bi..”,it means wrong, you can press the “R” button  reset again.

5.It is easy to check.

After you finsh the reseting, you can press the “v”button to check the resetter is resetting ok or no

6.Fianlly, you can find the” printhead healthy”program  lights shows“green”.It means the printhead has been successful resetted by our resetter.