• CHARACTERISTIC

1.  It can reset & refill the chip IC on the Epson intelligent ink cartridges, and do not change the property of the cartridge
2. Please note that the reset unit contains a number of notches, which are designed to couple with the various Epson black and color chipped cartridges
3. It can automatically identify the type of ink cartridge, and then reset the chip on the cartridge into a full mode. It can be compatible with most of the Epson intelligent ink cartridges in the market
4. It can be used for 7 pin chips and 9 pin chips

• ATTENTION

1. For chips witn 7pins:the touches on resetter need contact well with the 7 pins  in IC 
2. For chips with 9 pins:you should take attentions that two pins in two sides are used for sensors,and the leftover  7 pins are used for resetters

• CORRESPONDING PRINTER

1. Epson stylus Photo 780/ 785EPX/ 810/ 820/ 830/ 870/ 870LE/ 875DC/ 875DCS/ 890/ 895/ 915/ 925/ 950/ 1270/ 1280/ 1290/ 2000P/ 2100/ 2200
2. Epson Stylus C41/ C42/ C42+/ C42UX/ C42SX/ C50/ C60/ C61/ C62/ C63/C64/ C70/ C70+/ C80/ C82/C83/C84/ CX3100/CX3200/ CX5300/CX5200/R310/R210/R300/R200.
3. Epson Stylus Color 680/ 685/ 777/ 777i

• CORRESPONDING CARTRIDGES WITH CHIPS

1. EPSON T078120/T078220/T078320/T078420/T078520/T078620/T078920/T068120
2. EPSON T069120/T069220/T069320/T069420 /T069520T007/ T008/ T009/ T015/ T016/ T017/ T018/ T026/ T027/ T028/ T029/ T036/ T037/ T038/ T039/ T040/ T041/ T0321/ T0322/ T0323/ T0324/ T0331/ T0332/ T0333/ T0334/ T0335/ T0336/ T0341/ T0342/ T0343/ T0344/ T0345/ T0346/ T0347/ T0348/ T0421/ T0422/ T0423/ T0424/T0491/T0492/T0493/T0494/T0495/T0496/T0481/T0482/T0483/T0484/T0485/T0486

•  WEIGHT

           Net weight:0.04kg/pc

• Resetting Procedure

1. Align the cartridge to the correct notch on the reset unit so that the chip contacts and the pins on the QE868 Refill Ink LEVEL RESETTING SYSTEM meet
2. Keep the two units in firm contact. If the red light is blanking, it shows the two units contact well
3. If the red light turns to green, it shows the reset operation is successful
4. Cartridge is now ready for refilling with ink

• TROUBLESHOOTING

1. After the red LED flash, it stays on and doesn¡¦t turn green
   a). The pins on the QE868 Refill Ink LEVEL RESETTING SYSTEM are not in good contact with the chip on the cartridge. The contact may be dirty or oily.
   b). If the ink cartridge is not an original Epson brand ink cartridge, the chip may be not compatible with the QE868 Refill Ink LEVEL RESETTING SYSTEM.
   c). If the ink cartridge is an original Epson brand ink cartridge, the chip may be burned out or Epson may have changed the chip design. But the QE868 Refill Ink LEVEL RESETTING SYSTEM still can work with this kind of ink cartridge to fulfill the level, only the green light won¡¦t shine, the red LED does
2. The printing quality is not good
   a). The quality of the ink you are using may be inferior. We recommend using inks that are specifically matched to Epson¡¦s original colors and other characteristics. (Especially if you are printing digital photographs.)
   b). Air bubbles entrapped in ink. To avoid this, inject the ink very slowly. Also, allow the  cartridge to rest for 24 hours with the ink exit nozzles facing down before using.