| 1.The material of cartridge is P.P.material and aluminium sack,which can resist the erode of dye,UV,Eco-solvent ink.
2.Client can choose different ink as per their requirements.
3.After installing compatible chips on the cartridge,it can reduce printing cost.
4.If need,our company can manufacture the matching ink refill machine as per clients' demand,which can improve its working velocity.
Net Weight: 2.25kg/set(9pcs) |
|
|
|
| specifications︰ | Cartridge Model T5811~5819
T581180
T581880
T581780
T581980
T581380
T581680
T581280
T581580
T581480 |
| Advantages︰ | instruction Manual:
Refill ink：
Approach 1:
Use filter to refill ink directly into cartridge . When refilling, ink level is not more than the highest ink level line. Please note the correct ink refilling level
Approach 2:
After refilling ink, use connecting tube to drive air out from ink outlet hole of the cartridge,do that until ink fill swimmingly in whole cartridge. Remarks:
1.If you use this continuous ink supply system cartridges for the original usage of new equipment, or use compatible ink which is compatible completely with K3 original ink, after completing operation Approach 1 and 2,the cartridge can be installed directly and work at that time.
2.If the ink you use is not K3 ink and not compatible with the original ink, firstly you need to clean the remaining ink in the printer tube, damper and printer head, and then it is okay to install this cartridge.
3.In daily time, please refill ink when printer is closed or not working state. When refilling, ink level is not more than the highest ink level line. During process of printing, cartridge inside is in the state of high pressure, so please don’t pull the rubber stopper out. Ensure that to avoid ink spurt and effect normal printing.
Reset chip：
This model cartridge chip can be reset and count ink capacity. When printer is working and printer display shows little ink capacity, it is necessary to fetch cartridge out and use QE 388-2 chip resetter to reset chip when printer is closed or not working state. Make sure the chip touch well with the pins of chip resetter. In 2~3 seconds the green light will be bright, and then chip is okay. When resetting chip, cartridge should be placed in correct way. Don’t reverse the cartridge and put cartridge down
（Figure 5）
Installation complete：
Please see Figure 6.
（Figure 6）
Advantages︰ 1. The refill cartridge use transparent PP material, can use solvent ink. PP materail is tough, make sure not break during the delivery.
2. Fill the ink simply and conveniently.
3. The balance device inside the cartridge, prevent leaking ink.
４.Can be used over and over again.As long as the ink quality attains the standard,will not cause the breakdown generally.
５. Economical your expenditure and protect the environment.
|
|
|
|
