[COLOR]

BK/C/M/Y/LC/LM

[CORRESPONDING PRINTERS]

Seiko Color Painter 64S/100S

HP 9000S Printers

HP 10000/9000/8000

[INK VOLUMN]

1000±10ml/cartridge

[INSTRUCTION]

1.The Seiko empty cartridge needs to install the match chips.

2.The Seiko chip is sold by different district,because in different district the data of chip is different.So you should be sure that the chip is right in your district.

3.After installing the chip,you can refill the ink.

4.The cartridge has  Aluminous Sack inside.

5.the Aluminous Sack inside has four layers and can resist the erode of all ink which means it can be refill all kinds of ink.

[Instruction Manual for Refilling Seiko Aluminous Sack]

There are two methods to refill the ink into the cartridge.

Method one:
Approach 1:Inset the connecting tool into the hole of Seiko Aluminous Sack directly.
Approach 2:Connect the vacuum refill tool with the connecting tool, and then refill ink into the Aluminous Sack.
Approach 3:Use the matching silica gel to stopper the ink refill hole of the Aluminous Sack which has been refilled ink.
Approach 4:Install the plastic cap.
Approach 5:The ink refilling is completed.
Method two:
Approach 1:Cut the Seiko Aluminous Sack following the cut line position.
Approach 2:Open up the Aluminous Sack.
Approach 3:Refill ink directly into the Aluminous Sack.
Approach 4:Fold the Aluminous Sack which has been refilled ink along with the line,and use machine to seal it.
Approach 5: It is better to seal the Aluminous Sack with double lines, which can prevent from ink leaking.